1. |
Remove the rear wheel and tire (A) from rear hub .
|
2. |
Support the rear lower arm (A) with a jack as shown in the illustration.
|
3. |
Loosen the bolt & nut and then remove the rear lower arm (A) with
the rear axle.
|
4. |
Loosen the bolt & nut and then remove the rear lower arm (B) with
the sub frame (A).
|
5. |
Installation is the reverse of removal.
|
6. |
Check the wheel Alignment.
(Refer to Tires/Wheels - "Alignment")
|
A/C Pressure Transducer Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/charging station.
3.
...
Front Strut Assembly Disassembly
1.
Remove the dust cover(A).
2.
Using the special tool (09546-26000), compress the coil spring
(A).
3.
...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions. Refer to the chart below for the appropriate maintenance
intervals.
R : Replace
I : Ins ...