1. |
Remove the rear wheel and tire (A) from rear hub .
|
2. |
Support the rear lower arm (A) with a jack as shown in the illustration.
|
3. |
Loosen the bolt & nut and then remove the rear upper arm (A).
[2WD]
[4WD]
|
4. |
Installation is the reverse of removal.
|
Troubleshooting
Symptom
Probable cause
Remedy
play in steering
Loose yoke plug
Retighten
Loose steering gear mounting bolts
Retighten
L ...
Anti-Pinch Strip Installation
1.
Install the tailgate anti-pinch strip.
2.
Install the tailgate side trim.
3.
Connect the negative (-) batter ...
System Block Diagram
Component Parts And Function Outline
Component part
Function
Vehicle-speed sensor
Converts vehicle speed to pulse.
ECM
Receives signals fr ...