1. |
Check the bushing for wear and deterioration.
|
2. |
Check the lower arm for bending or breakage.
|
3. |
Check the lower arm for deformation.
|
4. |
Check the all bolts and nuts.
|
Teaching Procedures
1.
Key Teaching Procedure
Key teaching must be done after replacing a defective PCM(ECM)
or when providing additional keys to the vehicle owner.
The procedu ...
Disassembly
1.
Remove the steering wheel cover (B) after loosening the screw
(A-6ea).
2.
Disconnect the streeing wheel remote control s ...
Seat Heater Installation
1.
Install the driver / assist seat heater.
(Refer to Body - "Front seat")
2.
Install the rear seat LH heater and RH heater.
...