1. |
Remove the front wheel and tire (A) from front hub .
|
2. |
Loosen the bolt & nut and then remove the lower arm (A).
|
3. |
Remove the front lower arm (C) and than loosen the bolts (A,B)
& nuts.
|
4. |
Installation is the reverse of removal.
|
5. |
Check the wheel Alignment.
(Refer to Tires/Wheels - "Alignment")
|
Front Washer Motor Removal
-
When servicing the washer pump, be careful not to damage
the washer pump seal.
...
Alternator Specification
Alternator
Item
Specification
Rated voltage
13.5V, 130A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator bui ...
Installation
•
Install the component with the specified torques.
•
...