Kia Sorento: Front Strut Assembly Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Suspension System / Front Suspension System / Front Strut Assembly Inspection
| 1. |
Check the strut insulator for wear or damage.
|
| 2. |
Check rubber parts for damage or deterioration.
|
| 3. |
Compress and extend the piston rod (A) and check that there is
no abnormal resistance or unusual sound during operation.
|
Disposal
| 1. |
Fully extend the piston rod.
|
| 2. |
Drill a hole on the A section to remove gas from the cylinder.
|
Front Strut Assembly Disassembly
1.
Remove the dust cover(A).
2.
Using the special tool (09546-26000), compress the coil spring
(A).
3.
...
Front Strut Assembly Reassembly
1.
Install the spring lower pad (D) so that the protrusions(A) fit
in the holes (C) in the spring lower seat (B).
2.
Compress coil ...
See also:
Parking Assist Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
...
Smart key unit Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing (A).
(Refer to Body - "Crash pa ...
Occupant Detection system (ODS) Description
In order to make normal activation of airbag system, SRSCM detects DTC(s)
for the Passenger side Body Detection System. If the seat is occupied, Body
sensor detects how measuring electrostati ...
Copyright В© www.ksmanual.com 2014-2024