Kia Sorento: Differential Carrier Assembly

Propeller Shaft Removal and Installation

1. After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A). Tightening torque: ...

Rear Differential Carrier Component

1. Rear Differential Carrier 2. Coupling Assembly ...

See also:

IMS module Installation
1. Install the IMS module after reconnecting the connector. 2. Install the driver seat.    ...

Front Stabilizer Bar Removel
1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

Starter Disassembly
1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2. After loosening the screws (A), detach the magnet switch assembly ...