1. |
Check the driveshaft boots for damage and deterioration.
|
2. |
Check the ball joint for wear and damage.
|
3. |
Check the splines for wear and damage.
|
4. |
Check the driveshaft for cracks and wears.
|
5. |
Check the TJ outer race, inner race, cage and balls for rust or
damage.
|
6. |
Check for water, foreign matter, or rust in the BJ boot.
|
Measurement Method
Projected Dimensions
1.
These are the dimensions measured when the measurement points
are projected into the reference plane, and are the reference dimensions ...
Signal Waveform
...
Drive Belt Inspection
1.
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
  ...