Kia Sorento: Rear Hub - Carrier Disassembly
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier Disassembly
| 1. |
Remove the hub assembly mounting bolts (A-4ea) from the rear axle
carrier (B).
|
| 2. |
Remove the hub assembly (C) and the parking brake assembly (B)
from the rear axle carrier (A).
|
| 3. |
Assembly is the reverse order of disassembly.
|
Rear Hub - Carrier Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Rear Hub - Carrier Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...
See also:
Front Fog Lamps Installation
1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
...
Oil hydraulic Motor(Actuator) Inspection
If you have trouble code related to the oil hydraulic motor (actuator),
check oil hydraulic motor (actuator) according t ...
Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner
at the same time If it gets into its deploy condition after a collision. It
is located at near anchor on driver and pass ...
Copyright В© www.ksmanual.com 2014-2024