1. |
Remove the front wheel and tire (A) from front hub.
|
2. |
Remove the rear brake caliper.
(Refer to Brake System - "Rear Disc Brake")
|
3. |
Remove the wheel speed sensor (A), from the knuckle.
|
4. |
Remove the coking nut (A).
|
5. |
Remove the parking brake cable.
(Refer to Brake System - "Parking Brake Cable")
|
6. |
Remove the rear upper arm (A) after loosen the bolt (B).
[2WD]
[4WD]
|
7. |
Remove the rear strut assembly (C) after loosen the bolt (B) and
nut (A).
|
8. |
Remove the rear lower arm (B), spring (C) as loosening bolt (A)
after supporting rear lower arm (B) with jack.
|
9. |
Remove the rear assist arm (C), trailing arm (D) as loosening
bolt (A), nut (B).
[2WD]
[4WD]
|
10. |
Separate the end (B) of rear driveshaft on rear axle assembly
(A).
|
11. |
Install in the reverse order of removal.
|
12. |
Check the wheel alignment.
(Refer to Suspension System - "Alignment")
|
Immobilizer Control Unit Installation
1.
Install the immobilizer control unit after connecting the unit
connector.
2.
Install the crash pad lower panel.
...
Panorama Sunroof Replacement
Movable Glass Replacement
1.
Tilt the rear part of the movable glass (A) using the panorama
sunroof switch.
2.
Remove both side ...