Kia Sorento: BJ Boot Components
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Driveshaft Assembly / BJ Boot Components
| 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot |
5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band |
9. TJ boot 10. Spider assembly 11. Retainer ring 12. TJ housing |
13. Housing circlip |
Dynamic Damper Installation
1.
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper.
2.
Install the dynamic damper.
...
BJ Boot Removal and Installation
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refe ...
See also:
ATF Warmer Removal
1.
Drain the coolant.
(Refer to Engine Mechanical System - "Coolant")
2.
Remove the air cleaner assembly and air duct.
...
Smart key precautions
The smart key will not work if any of the following occur: The smart key
is close to a radio transmitter such as a radio station or an airport which
can interfere with normal operation of the s ...
Cargo Lamp Installation
1.
Replace the lamp bulb.
2.
Install the cargo lamp assembly after connecting the lamp connector.
...
Copyright © www.ksmanual.com 2014-2024