|
1. |
Remove the Front Driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
|
2. |
Remove the housing circlip (B) from the driveshaft spline (A).
|
3. |
Remove both boot bands from the TJ housing.
|
4. |
Remove the TJ housing (A).
|
5. |
Remove the retainer ring (A) from the shaft.
|
6. |
Remove the spider assembly (B) from the driveshaft (A) using the
special tool (09495-33000).
|
7. |
Clean the spider assembly.
|
8. |
Remove the TJ boot (A).
|
Rear Wheel Speed Sensor Components
1. Rear wheel speed sensor
2. Rear wheel speed sensor cable
...
Drive Belt Removal and Installation
1.
For release the tension, turn the drive belt tensioner counterclockwise
then remove the drive belt (A).
2.
Install the drive be ...
Timing Chain Components
1. Timing chain
2. Timing chain guide
3. Timing chain tension arm
4. Timing chain tension
5. Balance shaft chain
6. Balance shaft chain tension arm
7. Balance shaft ch ...