Kia Sorento: Front Hub / Knuckle / Tone Wheel Disassembly
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle / Tone Wheel Disassembly
| 1. |
Remove the brake disc (B) from the knuckle assembly (A).
|
| 2. |
Remove the hub assembly mounting bolts (B) from the knuckle (A).
|
| 3. |
Remove the hub assembly (C) and the dust cover (B) from the knuckle
(A).
|
| 4. |
Reassembly in the reverse order of disassembly.
|
Front Hub / Knuckle / Tone Wheel Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Front Hub / Knuckle / Tone Wheel Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
See also:
Power Tailgate Unit Installation
1.
Install the power tailgate unit.
2.
Install the rear left luggage side trim.
3.
Connect the negative (-) bat ...
Parking Brake Assembly Removal
Parking Brake Shoe
1.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear tire and wheel.
3.
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
...
Copyright В© www.ksmanual.com 2014-2024