1. |
Remove the front wheel and tire (A) from front hub .
|
2. |
Remove the brake caliper mounting bolts, and then place the brake
caliper assembly (A) with wire.
|
3. |
Remove the coking nut (A).
|
4. |
Remove the brake hose (A) and wheel speed sensor (B).
|
5. |
Remove the tie rod end ball joint (C) from the knuckle.
|
6. |
Disconnect the ball joint(A) from knuckle using the special tool
(09568-4A000).
|
7. |
Remove the lower arm (A) mounting bolt and nut from the knuckle.
|
8. |
Loosen the strut mounting bolts(A) and then remove the hub and
knuckle assembly from the strut assembly (B).
|
9. |
Install in the reverse order of removal.
|
Rear Lower Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear lower arm for deformation.
...
Multimedia Jack Installation
1.
Install the Multimedia jack.
2.
Install the console upper cover.
...
Towing
If the vehicle needs to be towed, call a professional towing service. Never tow
vehicle with just a rope or chain. It is very dangerous.[Front]
[Rear]
Emergency Towing
There are three popul ...