Kia Sorento: Front Hub / Knuckle / Tone Wheel Components

Front Axle Assembly

...

Front Hub / Knuckle / Tone Wheel Removal and Installation

1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) ...

See also:

Transaxle Oil Temperature Sensor Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Blind Spot Detection Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper. (Refer to Body - "Rear Bumper") ...

Propeller Shaft Removal and Installation
1. After making a match mark on the flange yoke and transfer companion, remove the propeller shaft mounting bolts (A). Tightening torque: ...