Kia Sorento: Pressure Sensor Installation

Pressure Sensor Removal

1. Remove the coupling assembly. (Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator Coupling") 2. Remove th ...

Driveshaft and axle

...

See also:

Circuit Diagram
...

Oil Pan Installation
1. Install the oil pan. (1) Using a gasket scraper, remove all the old sealant material from the gasket surfaces. ...

Battery Installation
1. Install in the reverse order of removal. Battery (-)terminal installation nut: 4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft) ...