Kia Sorento: Pressure Sensor Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor Inspection
If you have trouble code related to the pressure sensor check
pressure sensor according to the inspection process.
|
| Pressure Sensor Inspection Procedure |
| Measure the resistance of pressure sensor |
| 1. |
Turn ignition switch OFF.
|
| 2. |
Disconnect the pressure sensor connector.
|
| 3. |
Measure resistance between sensor terminal and terminal.
|
| 4. |
Check the measured resistance. (Refer to table)
|
Pressure Sensor Removal
1.
Remove the coupling assembly.
(Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator
Coupling")
2.
Remove th ...
See also:
Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC applie ...
Tightening Torques
Item
N.m
kgf.m
lb-ft
Ignition coil installation bolt
9.8 ~ 11.8
1.0 ~ 1.2
7.2 ~ 8.7
Spark plug installation
14.7 ~ 24. ...
IPM Trouble Diagnostics When Using GDS
1.
The IPM can be diagnosed by using the GDS. The BCM communicates
with the GDS which then displays inputs and outputs along with codes.
2.
...
Copyright © www.ksmanual.com 2014-2024