Kia Sorento: Pressure Sensor Description

The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status.

Oil hydraulic Motor(Actuator) Installation

1. Before installation, wipe the surface with a clean cloth. 2. Check the O-rings (A) of the new hydraulic motor (actuators). ...

Pressure Sensor Circuit Diagram

...

See also:

Air Ventilation Seat Removal
1. Remove the seat back cover (A). (Refer to Body - "Front seat") 2. Remove the blower fan (A) after removing the scr ...

Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the manifolds fo ...

Tightening Torques
Item N.m kgf.m lb-ft Ignition coil installation bolt 9.8 ~ 11.8 1.0 ~ 1.2 7.2 ~ 8.7 Spark plug installation 14.7 ~ 24. ...