1. |
Before installation, wipe the surface with a clean cloth.
|
2. |
Check the O-rings (A) of the new hydraulic motor (actuators).
|
3. |
Tighten the bolts after install the hydraulic motor (actuators).
|
4. |
Wipe the flowed oil to around the surface with a clean cloth.
|
5. |
Install the coupling assembly.
(Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator
Coupling")
|
IMS module Installation
1.
Install the IMS module after reconnecting the connector.
2.
Install the driver seat.
...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...
Interior overview
1. Driver position memory system button
2. Inside door handle
3. Power window switch
4. Central door lock switch
5. Power window lock button
6. Outside rearview mirror control
7. Outside rearv ...