1. |
Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing
with the GDS tool.
(Refer to 4WD Control System - "Repair procedures")
|
2. |
Disconnect the battery negative cable from the battery
|
3. |
Disconnect the 4WD ECU connector (A).
|
4. |
Loosen the nuts (A) and then remove the 4WD ECU.
|
Circuit Diagram
...
Panorama Sunroof Motor Inspection
1.
Close the panorama sunroof glass and blind completely (Full close
position).
2.
Disconnect the negative (-) battery terminal.
...
IMS module Installation
1.
Install the IMS module after reconnecting the connector.
2.
Install the driver seat.
...