Kia Sorento: 4WD ECU Circuit Diagram and Connector
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / 4 Wheel Drive (4WD) System / 4WD Control System / 4WD ECU Circuit Diagram and Connector
| 4WD ECU Connector |
| Pin |
Function |
| 1 |
MOTOR A |
| 2 |
MOTOR B |
| 3 |
LOCK MODE SWITCH (Input) |
| 4 |
- |
| 5 |
PRESSURE SENSOR SIGNAL (Input) |
| 6 |
- |
| 7 |
CAN communication line (Low) |
| 8 |
CAN communication line (High) |
| 9 |
- |
| 10 |
- |
| 11 |
- |
| 12 |
IG. POWER (Input) |
| 13 |
GROUND |
| 14 |
BATTERY (Input) |
| 15 |
PRESSURE SENSOR GROUND (-) |
| 16 |
PRESSURE SENSOR SUPPLY (+) |
| 17 |
- |
| 18 |
- |
See also:
Seat Belt Pretensioner (BPT) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Electric power steering (EPS)
The power steering uses a motor to assist you in steering the vehicle. If the
engine is off or if the power steering system becomes inoperative, the vehicle may
still be steered, but it will require ...
Auto Defogging Sensor Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure
and DTC guide. ...
Copyright В© www.ksmanual.com 2014-2024