It is not recommended to overhaul the transfer assembly because
a special three-dimensional measuring instrument is required to determine
the sizes of the transfer assembly spacers when disassembling and reassembling
the transfer assembly. If putting wrong sized spacers in the transfer
assembly, it may cause noise and vibration.So, if inner parts of the
transfer assembly need to be replaced, the transfer assembly should
be replaced with new one.
|
1. |
Remove the following items;
|
2. |
Remove the propeller shaft (A).
|
3. |
Loosen the transfer upper & lower mounting bolts. (transfer side
→ transaxle side)
|
4. |
Loosen the transfer lower mounting blot. (transaxle side → transfer
side)
|
Circuit Diagram
Circuit Diagram (2)
Circuit Diagram (3)
...
Diagnosis Of Immobilizer Faults
-
Communication between the ECM and the SMARTRA.
-
Function of the SMARTRA and the transponder.
-
Data (stored in the EC ...
Installation
1.
Install the multifunction switch.
2.
Install the clock spring and steering wheel.
3.
Install the steering co ...