Adjusting method for T/M control cable |
1. |
Set room side shift lever and T/M side manual control lever to
"N" position.
|
2. |
Connect room side shift lever and shift cable.
|
3. |
Push cable to "F" direction shown to eliminate FREE PLAY.
|
4. |
Tighten adjusting nut (A).
|
5. |
After adjusting according check to be sure that this part operates
surely at each range of T/M side corresponding to each position of shift
lever.
|
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Inspection
Front Door Lock Actuator
1.
Remove the front door trim.
(Refer to Body - "Front door")
2.
Remove the front door module.
...