Kia Sorento: Shift Cable Removal
| 1. |
Remove the floor console.
(Refer to Body - "Floor console")
|
| 2. |
Remove the air duct.
|
| 3. |
Disconnect the shift cable (A).
|
| 4. |
Remove the retainer (A) and nut (B).
|
| 5. |
Remove the nut (C) from the manual control lever.
|
| 6. |
Remove the cable (B) from the bracket (A) at transaxle assembly
side.
|
| 7. |
Remove the shift cable by pulling it toward the interior.
|
Shift Cable Components
1. Shift lever mounting bolt
2. Shift lever assembly
3. Shift cable assembly
4. Shift lever knob & boots assembly
5. Manual control lever
6. Retainer
...
Shift Cable Installation
1.
Install in the reverse order of removal.
Set shift lever and inhibitor ...
See also:
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent damage to ...
General
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Transfer Fluid Replacement
Change
Normal Use
Severe Use
No service required
...
Copyright В© www.ksmanual.com 2014-2024