Kia Sorento: Shift Lever Removal - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Shift Lever Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Removal

1.
Remove the floor console.
(Refer to Body - "Floor console")
2.
Remove the air duct.
3.
Disconnect the sports mode connector (A).

4.
Disconnect the shift cable (A).

5.
Remove the shift lever assembly (A) by removing the bolts (C-4ea).

Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Shift Lever Components
1. Shift lever mounting bolt 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer ...

Shift Lever Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor ...

See also:

Direct Electro Hydraulic Actuator Coupling Components
1. Coupling assembly 2. Input shaft 3. Pressure sensor 4. Extension wiring 5. Oil hydraulic Motor(Actuator) ...

Opening the tailgate
The tailgate is locked or unlocked when all doors are locked or unlocked with the key, transmitter (or smart key) or central door lock switch. If unlocked, the tailgate can be opened by press ...

Rear Air Conditioner Unit Components
1. Rear Heater Case (LH) 2. Rear Heater Case (RH) 3. Lower Case 4. Drain Hose 5. Rear Evaporator Core 6. Refrigerant Line 7. Flange Lining 8. O-Ring 9. Rear ...

Copyright В© www.ksmanual.com 2014-2024