1. |
Place the shift lever into the "N" position.
|
2. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the battery and the battery tray.
(Refer to Engine Electrical System - "Battery")
|
4. |
Disconnect the inhibitor switch connector (A).
|
5. |
Remove the shift cable mounting nut (A).
|
6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Spark Plug Description
A spark plug is a device for delivering electric current from an ignition
system to the combustion chamber of a spark-ignition engine to ignite the compressed
fuel/air mixture therein by mean ...
Front Hub / Knuckle / Tone Wheel Disassembly
1.
Remove the brake disc (B) from the knuckle assembly (A).
Tightening torque:
4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft)
...
Timing Chain Installation
1.
Install the balance shaft chain.
(Refer to Lubrication system - "Balance Shaft & Oil Pump")
2.
Install the crankshaft ...