Kia Sorento: Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the hydraulic pressure
will need to be adjusted after replacing the VFS solenoid valve. If
replacing the VFS solenoid valve; also replace the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
SS-A Solenoid Valve(ON/OFF)
SS-A solenoid valve is attached to the valve body and is an on/off solenoid
valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.
...
See also:
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure on th ...
ATF Warmer Removal
1.
Drain the coolant.
(Refer to Engine Mechanical System - "Coolant")
2.
Remove the air cleaner assembly and air duct.
...
Specifications
Memory Power Seat Unit
Item
Specification
Rating voltage
DC 12V
Operation voltage
DC 9V ~ 16V
Operation temperaure
-30В°C ...
Copyright В© www.ksmanual.com 2014-2024