Kia Sorento: Inspection
| 1. |
Turn ignition switch OFF.
|
| 2. |
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 3. |
Disconnect the solenoid valve connector (A).
|
| 4. |
Measure resistance between sensor signal terminal and sensor ground
terminal.
|
| 5. |
Check that the resistance is within the specification.
|
Circuit Diagram
...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
See also:
Specifications, Consumer information and Reporting safety defects
Dimensions
*1 with roof rack
*2 with sunroof and roof rack
Engine
Bulb wattage
Tires and wheels
CAUTION
When replacing tires, use the same size originally supplied with the vehicle.
...
Air Ventilation Seat Control Unit Installation
1.
Install the air ventilation seat control unit and connector.
...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Copyright © www.ksmanual.com 2014-2024