Kia Sorento: Installation - Torque Converter Control Solenoid Valve (T/CON_VFS) - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) / Installation

1.
Install in the reverse order of removal.
  
•
Adding coolant.
(Refer to Engine Mechanical System - "Coolant")
•
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
•
Perform Transaxle Control Module(TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...

26 Brake Control Solenoid Valve(26/B_VFS)
26Brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake. ...

See also:

Cylinder Block Disassembly
   • Use fender covers to avoid damaging painted surfaces. • ...

High Pressure Fuel Pump Removal
   In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be inju ...

Panorama Sunroof Replacement
Movable Glass Replacement 1. Tilt the rear part of the movable glass (A) using the panorama sunroof switch. 2. Remove both side ...

Copyright © www.ksmanual.com 2014-2024