Kia Sorento: Output Speed Sensor Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Removal
| 1. |
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
| 2. |
Disconnect the input & output speed sensor connector (A).
|
| 3. |
Remove the input & output speed sensor (B) after removing the
bolts (2ea).
|
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Output Speed Sensor Installation
1.
Install in the reverse order of removal.
•
...
See also:
Knock Sensor (KS)
Knocking is a phenomenon characterized by undesirable vibration and noise
and can cause engine damage. Knock Sensor (KS) is installed on the cylinder
block and senses engine knocking.
Whe ...
Timing Chain Removal
1.
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
2.
Turn the crankshaft pulley and ...
Special Tools
Tool (Number and name)
Illustration
Use
09793-21000
Door hinge adjusting wrench
Adjustment, removal and installationof the door hinge
...
Copyright В© www.ksmanual.com 2014-2024