Kia Sorento: Input Speed Sensor Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Removal
| 1. |
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
|
| 2. |
Disconnect the input & output speed sensor connector (A).
|
| 3. |
Remove the input & output speed sensor (B) after removing the
bolts (2ea).
|
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Input Speed Sensor Installation
1.
Install in the reverse order of removal.
•
...
See also:
Audio Remote Control Inspection
1.
Check for resistance between No.2 and No.7 terminals in each switch
position.
[Audio System]
Switch
Connector
terminal
...
Audio Remote Control Removal
1.
Remove the driver airbag module.
(Refer to Restraint - "Airbag module")
2.
Remove the steering wheel front cover (A) after ...
Audio Remote Control Installation
1.
Install the audio remote control switch on the steering wheel
front cover.
2.
Install the steering wheel front cover.
...
Copyright В© www.ksmanual.com 2014-2024