Kia Sorento: Description
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation values.
These values are used to control the actuators and achieve the desired control
output. If a problem with the drivetrain, including the transaxle, has been
identified, perform self-diagnosis and basic transaxle inspection (oil and fluid
inspection) and then check the control system's components using the diagnosis
tool.
See also:
Fuel Tank Air Filter Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Lift the vehicle.
3.
D ...
Components Location
1. Front axle
2. Front lower arm
3. Drive shaft
4. Sub frame
5. Stabilizer bar
6. Steering gearbox
7. Stabilizer link
8. Front strut assembly
...
Telemetics Unit (TMU) Component
Connector Pin Specification
No.
Pin Name
Type
From
To
Description (Wiring Spec.)
1
GND
DC Ground
TMU
Battery
...
Copyright В© www.ksmanual.com 2014-2024