Kia Sorento: ATF Warmer Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Removal
| 1. |
Drain the coolant.
(Refer to Engine Mechanical System - "Coolant")
|
| 2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
| 3. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 4. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
| 5. |
Disconnect the coolant hose (B) after removing the coolant hose
clamp (A).
|
| 6. |
Disconnect the hose (B) after removing the automatic transaxle
fluid cooler hose clamp (A).
|
| 7. |
Remove the ATF Warmer (A).
|
ATF Warmer Component
1. ATF Warmar
2. Bypass valve
3. ATF hose & pipe
4. Coolant hose & pipe
...
ATF Warmer Installation
1.
Install in the reverse order of removal.
•
...
See also:
Mirror Replacement
Outside Rear View Mirror Assembly Replacement
•
When prying with a flat-up screwdriver, w ...
Cup holder
WARNING - Hot liquids
Do not place uncovered cups with hot liquid in the cup holder while the
vehicle is in motion. If the hot liquid spills, you may burn yourself. Such
a burn to the driver c ...
Battery Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation
nut:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft) ...
Copyright © www.ksmanual.com 2014-2024