Kia Sorento: Oil Pump Component
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Component
| 1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bush-Housing |
7. Reaction shaft 8. Bush- Reaction shaft 9. Sleeve 10. Flange bolt 11.Bolt |
Oil pump operation flow
| 1. Inhale(Oil filter) 2. Inhale(Valve body) 3. Outlet 4. 26/B operation pressure |
5. 35R/C operation pressure 6. Lubrication 7. Lock up clutch operation pressure 8. Lock up clutch cancellation |
Oil Pump Component Location
1. Automatic transaxle
2. Oil pump assembly
...
Fluid Component Location
1. ATF Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...
See also:
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front window glass. The
sensor judges and sends signal if moisture occurs to blow out wind for defogging.
The air conditioner control module rece ...
Panorama Sunroof Motor Replacement
Resetting The Panoramaroof
Whenever the vehicle battery is disconnected or discharged, or you use
the emergency handle to operate the panoramaroof, you have to reset your panoramaroof
sys ...
Cowl Top Cover Replacement
1.
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ ...
Copyright В© www.ksmanual.com 2014-2024