1. |
Remove the engine cover.
(Refer to Engine Mechanical System - "Engine cover")
|
2. |
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
|
3. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
4. |
Disconnect the inhibitor switch connect (A) and solenoid valve
connector (B).
|
5. |
Remove the CKP sensor (A).
|
6. |
Remove the shift cable (B) after removing the nut (C) and the
bolt (A).
|
7. |
Remove the ground line after removing the bolt (A).
|
8. |
Remove the wiring bracket installation bolt (A).
|
9. |
Disconnect the coolant hose (B) after removing the automatic transaxle
coolant hose clamp (A).
|
10. |
Remove the wiring mounting clip (C).
|
11. |
Remove the coolant pipe mounting bolts (A).
|
12. |
Remove the coolant pipe (B).
|
13. |
Remove the wiring bracket installation bolt (A).
|
14. |
Assembled the engine support fixture.
(Refer to Special Service Tools - " Engine support fixture special
tool assembly drawing")
|
15. |
Remove the hood lift.
(Refer to Body-"Hood")
|
16. |
Using the engine support fixture (A), hold the engine and transaxle
assembly safely.
|
17. |
Remove the automatic transaxle upper mounting bolts (A) and the
starter motor mounting bolt (B).
|
18. |
Remove the mounting bracket cover (A).
|
19. |
Remove the automatic transaxle mounting bracket bolt (A).
|
20. |
Remove the automatic transaxle mounting support bracket bolts
(A).
|
21. |
Remove the automatic transaxle mounting support bracket (B).
|
22. |
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
|
23. |
Remove the side cover (A).
|
24. |
Remove the following items;
2WD
4WD
|
25. |
Remove the dust cover (A).
|
26. |
Remove the torque converter mounting bolts (A) with rotating the
crankshaft.
|
27. |
Remove the start motor mounting bolt (A).
|
28. |
Remove the automatic transaxle with a jack after removing the
mounting bolts (A, B).
|
Valve Body Removal
1.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
2.
Remove the battery and the battery tray.
...
Specifications
Item
Specifications
Transaxle type
A6LF2
Engine model
Gasoline 3.3 GDI
Torque converter type
3-element, 1-stage, 2 ...
General Information
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...