1. |
Lift the vehicle.
|
2. |
Disconnect the fuel filler hose (A).
|
3. |
Disconnect the ventilation tube quick-connector ( B).
|
4. |
Open the fuel filler door and unfasten the filler-neck assembly
mounting screw (A).
|
5. |
Remove the rear-LH wheel, tire and the inner wheel house.
|
6. |
Remove the filler-neck assembly from the vehicle after removing
the bracket mounting nut (A).
|
Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used
to control gear setting signals.
...
Troubleshooting
Symptom
Suspect Area
Remedy (Refer to page)
Water leaks from panorama sunroof
Deteriorated roof lid weatherstrip
Replace
Excessive roof lid ...
Description
The Vehicle Information System is a Telematics service that ensures comfortable
and enjoyable driving by providing safety, security, and vehicle diagnostic
information, with the option of usi ...