Kia Sorento: Fuel Line Removal
| 1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
| 2. |
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line")
|
| 3. |
Disconnect the low pressure fuel quick-connector (A).
|
| 4. |
Disconnect the vapor hose (A) which is connected from the PCSV.
|
| 5. |
Lift the vehicle.
|
| 6. |
Remove the fuel tank.
(Refer to Fuel Delivery System - " Fuel Tank")
|
| 7. |
Disconnect the vapor tube quick-connector (A).
|
| 8. |
Open the vapor tube and low fuel line fixing clip to using driver.
|
| 9. |
Release the under cover (A) after remove the mounting bolts.
|
| 10. |
Disconnect the fuel & brake line protect (A) from the fixing clip.
|
| 11. |
Disconnect the fuel line fixing bracket (A) to engine room low.
|
| 12. |
Remove the fuel line.
|
Fuel Pressure Regulator Installation
1.
Install in the reverse order of removal.
...
Fuel Line Installation
1.
Install in the reverse order of removal.
...
See also:
Transaxle Oil Temperature Sensor Specifications
▷ Type: Negative Thermal Coefficient Type(NTC)
Temp.(°C)°F
Resistance (kΩ)
(-40)-40
48.1
(-20)-4.0
15.6
(0)32 ...
Speakers Replacement
Front Speaker
1.
Remove the front door trim.
(Refer to Body - "Front door")
2.
Remove the front speaker (A) after removing ...
Copyright © www.ksmanual.com 2014-2024