1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
2. |
Remove the fuel pump assembly.
|
3. |
Check motor operation by fuel pump connector (A) connecting power
(No.4) and ground (No.5).
|
1. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
2. |
Remove the fuel pump assembly.
|
3. |
Using an ohmmeter, measure the resistance between terminals 1
and 3 of sender connector (A) at each float level.
|
4. |
Also check that the resistance changes smoothly when the float
is moved from "E" to "F".
|
Spark Plug Cleaning
The combustion temporarily becomes unstable, due to the aged fuel and
the carbon deposits accumulated on the spark plug(s) after long-term storage.
[1st Method]
1.
...
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at hig ...
Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alternator pulley
...