1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the fuel pressure regulator valve connector.
|
3. |
Measure resistance between the fuel pressure regulator valve terminals
1 and 2.
|
4. |
Check that the resistance is within the specification.
|
Passenger Airbag (PAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Catalytic Converter Removal
1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
...
Components
1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Exhaust camshaft upper ...