Kia Sorento: Inspection - Variable Intake Solenoid (VIS) Valve - Engine Control System - Engine Control / Fuel System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Inspection

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve / Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.

Specification: Refer to "Specification"

Circuit Diagram
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the variable intake solenoid valve connector ( ...

See also:

TPMS Sensor Description
1. Mode (1) Configuration State A. All sensors should be in the Low Line state. ...

Water Temperature Control Assembly Components
1. O-ring 2. Water temperature control assembly 3. Water inlet fitting 4. Engine coolant temperature sensor 5. Thermostat 6. Thermostat gasket 7. Oil cooler coolant ho ...

Quarter Fixed Glass Removal
   • Put on gloves to protect your hands. • ...

Copyright © www.ksmanual.com 2014-2024