In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be injury caused by
leakage of the high pressure fuel. So don’t do any repair work right
after engine stops.
|
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Release the residual pressure in fuel line.
(Refer to Engine Mechanical System - "Coolant")
|
3. |
Remove the delivery pipe & injector assembly.
(Refer to Fuel Delivery System - "Delivery Pipe")
|
4. |
Remove the fixing clip (A), and then separate the injector from
the delivery pipe.
|
Special Service Tools
Tool(Number and Name)
Illustration
Use
09581-11000
Piston expander
Spreading the front disc brake piston.
...
4WD ECU Input&Output Diagram
...
Power Window Switch Inspection
Main Power Window Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim and power window switch.
...