Kia Sorento: Specification
| Pressure [kPa (kgf/cm², in H2O) |
Output Voltage (V) |
| -3.75 (-0.038, -15.05) |
4.5 |
| 0 |
1.5 |
| +1.25 (0.013, 5.02) |
0.5 |
Fuel Tank Pressure Sensor (FTPS)
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission
control system and is installed on the fuel tank, the fuel pump, or the canister.
It checks the purge control solen ...
Circuit Diagram
...
See also:
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16 pins)
in driver side crash pad lower panel, turn the power on GDS.
2.
...
Auto Defogging Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto defogging sensor cover (A).
3.
Disconnect t ...
Oil Cooler Installation
1.
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
Tightening torque:
...
Copyright В© www.ksmanual.com 2014-2024