1. |
Connect the GDS on the Data Link Connector (DLC).
|
2. |
Turn the ignition switch ON.
|
3. |
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
|
TPMS Sensor Removal
Tire Removal
1.
Deflate tire & remove balance weights.
...
Component Location (1)
1. Buzzer
2. Console S/W
3. RKE
4. Anti Pinch Strip
5. Spindle Drive
6. Tailgate Trim Switch
7. Power Latch
8. PTG Control Module
9. Anti Pinch Strip
10. Body ...
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any spill ...