Kia Sorento: Inspection

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Control / Fuel System / Engine Control System / Rail Pressure Sensor (RPS) / Inspection

1.	Connect the GDS on the Data Link Connector (DLC).

2.

Measure the output voltage of the RPS at idle and various engine speed.

Condition	Output Voltage (V)
Idle	Approx. 1.2
1,500 rpm	2.0 ~ 2.2
6,300 rpm	Approx. 2.8

Circuit Diagram

...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line. (Refe ...

See also:

SRS Care
The SRS is virtually maintenancefree and so there are no parts you can safely service by yourself. If the SRS air bag warning light does not illuminate, or continuously remains on, have your vehicle ...

AC Inverter Switch Installation
1. Install the AC switch. 2. Install the console upper cover and console upper tray. 3. Connect the negative (- ...

Fuel Pump Motor Installation
1. Install in the reverse order of removal. ...

Categories

Copyright © www.ksmanual.com 2014-2024