Kia Sorento: Inspection
| 1. |
Turn the ignition switch OFF.
|
| 2. |
Disconnect the HO2S connector.
|
| 3. |
Measure resistance between the HO2S terminals 4 and 5 [B1/S1].
|
| 4. |
Measure resistance between the HO2S terminals 3 and 4 [B1/S2].
|
| 5. |
Check that the resistance is within the specification.
|
Circuit Diagram
...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the connector (A), and then remove the sensor ...
See also:
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the variable intake solenoid valve connector ( ...
Panorama Sunroof Replacement
Movable Glass Replacement
1.
Tilt the rear part of the movable glass (A) using the panorama
sunroof switch.
2.
Remove both side ...
Seat Heater Removal
1.
Remove the driver / assist seat back heater (A) and cushion heater
(B).
(Refer to Body - "Front seat")
2.
...
Copyright © www.ksmanual.com 2014-2024