Kia Sorento: Removal - Knock Sensor (KS) - Engine Control System - Engine Control / Fuel System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Control / Fuel System / Engine Control System / Knock Sensor (KS) / Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold.
(Refer to Engine Mechanical System - "Intake Manifold")
3.
Disconnect the injector connector (A).
4.
Remove the installation bolt (B), and then remove the sensor from the cylinder block.

Circuit Diagram
...

Installation
   • Install the component with the specified torques. • ...

See also:

Specification
...

Specification
Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)] ...

Injector
The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits th ...

Copyright © www.ksmanual.com 2014-2024