Kia Sorento: Installation
•
|
Note that internal damage may occur when the component
is dropped. If the component has been dropped, inspect before
installing.
|
|
•
|
Apply the engine coolant to the O-ring.
|
|
•
|
Insert the sensor in the installation hole and be careful
not to damage.
|
|
1. |
Install in the reverse order of removal.
|
•
|
Supplement the engine coolant. (Refer to Engine Mechanical
System - "Coolant")
|
|
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the engine coolant temperature sensor connecto ...
See also:
Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used
to control gear setting signals.
...
Rear Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recover/recycling/charging station.
3.
...
Spark Plug Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
...