1. |
Turn the ignition switch OFF.
|
2. |
Remove the ECTS (Refer to "Removal").
|
3. |
After immersing the thermistor of the sensor into engine coolant,
measure resistance between the ECTS terminals 3 and 4.
|
4. |
Check that the resistance is within the specification.
|
Specification
Ignition System
Ignition Coil
Item
Specification
Primary Coil Resistance (Ω)
0.62 ± 10% [20°C (68°F)]
Secondary Coil Re ...
Engine Cover Removal and Installation
1.
Remove the engine cover (A).
2.
Install in the reverse order of removal.
...
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt:
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...