1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Lift the vehicle.
|
3. |
Disconnect the canister close valve connector (A).
|
4. |
Disconnect the ventilation tube quick-connector (B) from the fuel
tank air filter and canister close valve.
|
5. |
Disconnect the vapor tube quick-connector (A).
|
6. |
Remove the canister assembly bracket (D) after removing the mounting
bolts (B) and nut (C).
|
7. |
Remove the canister braket (B) installation bolt (A).
|
8. |
Remove the fuel tank air filter & canister close valve assembly
(A) after rotating it in the direction of the arrow in the figure.
|
9. |
Release the lever (A), and then separate the canister close valve
(B) from the fuel tank air filter (C) after rotating it in the direction
of the arrow in the figure.
|
Specifications
Memory Power Seat Unit
Item
Specification
Rating voltage
DC 12V
Operation voltage
DC 9V ~ 16V
Operation temperaure
-30°C ...
Parking Assist Sensor Installation
1.
Install the rear ultra sensor after connecting the connector.
2.
Install the rear bumper cover.
3.
Connect t ...
Fuel Pump Inspection
[Fuel pump motor]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
...