1. |
After disconnecting the vapor hose from the PCV valve, remove
the PCV valve.
|
2. |
Reconnect the PCV valve to the vapor hose.
|
3. |
Inspect the PCV vlave operation.
|
4. |
If the vacuum is not felt, clean or replace the vapor hose.
|
Troubleshooting
Symptom
Suspect area
Engine will not start or stuggle to start
Vapor hose damaged or disconnected
Engine stuggle to start
Malfunction of the Purge ...
Front Disc Brake Replacement
Front brake pads
1.
Loosen the guide rod bolt (B) and then remove caliper body (A).
2.
Replace pad shim (D), pad retainers (C) and b ...
Side Body B
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...