1. |
Disconnect the battery negative terminal.
|
2. |
Remove the fuse box cover.
|
3. |
Remove the starter relay(A).
|
4. |
Using an ohmmeter, check that there is continuity between each
terminal.
|
5. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
|
6. |
If there is no continuity, replace the starter relay.
|
7. |
Install the starter relay.
|
8. |
Install the fuse box cover.
|
Transmitter Inspection
1.
Check that the red light flickers when the door lock or unlock
button is pressed on the transmitter.
2.
Remove the battery (A) and check ...
Antenna Installation
1.
Connect the roof antenna cables and connectors.
2.
Install the rear roof trim.
...
Specification
[Throttle Position Sensor (TPS)]
Throttle Angle(В°)
Output Voltage(V)
TPS1
TPS2
0
0.0
5.0
10
0.48
4.52
...